Hi, I have tried many different ways of using gravity. The biggest
issue with Gravity is it has 1 source of energy to 1 output system so
the action force always equals the counter reaction force.
I found that the way to make something work is to use 2 energies for 1
output system.
So the counter reaction has its own energy source making it ( 1 - 1 =
0 counter reaction
and because there are 2 energies one is left as a usable output power.
I am not sure how Bassler made the counter reaction less than the
action but he did tell people that is what needed to be done.
You have mentioned that you have done something similar in separating
the voltage and amperage into 2 different parts electronically, that
was very interesting,
Can you tell me how much output watts to the input watts
A few months ago I made a electric test device that had 60 watts input
that ran a 12,000 volt 60hz. coil of 18 ga copper wire wrapped around
a zinc rod 3/4 dim. and 12 inches long. The zinc rod had a 3/16 iron
rod going the length with 1 inch coming out each end, to connect wires
on each end ( one end went to earth ground ) and ( the other end went
to test the volts and amps) back to the 12,000 transformer neutral.
input watts = 60 - 60hz. /// ( output volts 190 volts. output amps =
2.3 amps ) = 437 watts 60 hz. ( 437/ 60 = 7.28 times overunity )
no electronics involved.
--- I am going on a trip for a few weeks (no email access)    I will
be back in june.  looking forward to hearing about your system.
Thanks Tom